Wismec LUXOTIC DF BOX 200W Mod | User Manual

How to use:
1. Power on/off: Push forward the battery cover and put two high-rate 18650 cells into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
Note:
(1). Please adjust the wattage to a proper range to match the atomizer you used before using
(2). Please be careful not to use battery with tom shell for safety

2. E-liquid Filling: Take off the back cover and push forward the battery bottom cover, then pull out the e-liquid bottle. Unscrew the top cap of the e-liquid bottle, inject the e-liquid into the bottle. After filling, put all the parts back. (Note: Please do not overfill.)

3. Vaping: Press the fire button to inhale and release to exhale. (Note: When use the squonk RDA. please squeeze the silicone bottle to let the e-liquid go into the coil and cotton firstly, and then you can take the puffs.)

4. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.

5. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function

6. Micro use port function: The use port can be used for charging and upgrading firmware. It is better to take out the cell and charge it through external charger.

7. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.
Shift among VWfTC-NifTC-TifTC-SSfTCR Mode
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VWfTC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm.
Under TCfTCR mode, while the mode sign flashing, press the left regulatory button to enter into its submenu Then press the right regulatory button to choose TC-Nifli/SS (TC mode) or M1/M2/M3(TCR mode). Press the fire button to confirm.
Wattage adjustment: In VW mode, output wattage can be adjusted from 1 W to 200W by pressing the regulatory buttons, right to increase and left to decrease. In TC mode, while the wattage sign blink, press the right or left regulatory button to adjust the wattage, and press fire button to confirm
Temperature adjustment: In TC modes, the temperature can be adjusted from (100-315'C or 200-600'F) with the two regulatory buttons, right to increase and left to decrease
Resistance locked function: While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note: Such operation should be carried out at room temperature.)
Shift among Current, Puff and Time: While the user information sign blink, press the right regulatory button to shift among current, puff and time.
 Logo Mode:
When powered on, press the fire button and right regulatory button simultaneously and then you enter into the Logo Mode. Press the left regulatory button to choose between logo "ON" and "OFF", and press the fire button to confirm.
You can download our logo. You can also make logos to your preference, and then import it through software The logo should be monochrome image in the format of bmp with limited 64*48 pixel.

The Setting of Preheat Function:

(1). Long press the fire button and right regulatory button simultaneously to enter the menu
(2). Press the right regulatory button to enter the preheat setting menu
(3). Press the fire button to switch between preheat power and preheat duration
(4). Press the left or right regulatory button to decrease or increase the parameter
(5). Long press the fire button to confirm.

Adjustable Timeout Duration:

Due to different vaping habits, you're allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press the fire button and right regulatory button simultaneously to enter into the menu system. Press the right regulatory button two times to enter the timeout duration setting. Press the left regulatory button to set the duration and then press the fire button to confirm.
Once the duration is set (like 5 seconds), when you hold the fire button and vape over the pre-set time, it'll display "OVER 5S PROTECT'and shut down automatically. Press the fire button 5 times to restart.

Warranty

Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error.
This warranty is only valid for authentic WISMEC products within warranty period from date of purchase by the end user.

Warning

1. Keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.
Contra-indication
1.Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2.Do not leave the product in high temperature or damp conditions, as this may demage the product. The oppropriate operation temperature is within 0℃ to 45℃ while charging and -10℃ to 60℃ while in use.
3.Keep away from water.

Possible adverse effects

1. Use of this product may cause damage to health
2. For people with adverse reaction after using this product, it is recommended to use the juice with lower nicotine content or no nicotine.