Is the Tesla Invader 4 VV Kit Worth Trying?
The Invader 4 VV Kit is a mechanical mod from Teslacigs. Unlike our usual vape mod, it has no display and no temperature control. However, it is equipped with the latest Invader 4X RDA.
I think it's more suitable for advanced users because it not only brings a stronger vaping effect but also a bit difficult to control relative to vape beginners. Why do I say this, let me know more about the Tesla Invader 4 VV Kit?
Powered by two 18650 batteries, the Invader 4 VV Mod can achieve a maximum output of up to 280W. Equipped with a knob that supports 5 level voltage regulation. The knobs are medium in size and the thumb and forefinger are well controlled.
It doesn't have a display, so you need to choose the voltage you want based on your own judgment and vaping experience. The Invader 4X RDA supports the installation of a single coil. By rotating the Tank tube, the user is free to control the amount of air intake desired. Whether it is vapor production, vapor temperature or taste. Anything can be defined by ourselves.
Mod Dimension 88 * 52 * 26mm
Mod Material PC + ABS
Atomizer Dimension 25 * 34mm
Post Holes 1.5 * 3.0mm
Drip Tip Resin Wide Bore Drip Tip
Cell Type 2 * 18650 Cells (NOT Included)
Max Output Wattage 280W
Voltage Adjust 1-5 Level
Output Voltage Range 3-8V
Max Output Current 53A
Resistance Range 0.08-3.0ohm
Input Voltage Range 6.4-8.4V
USB 5V/1.5A
LED Light Indicator Blue-Green-Red
However, it should be noted that it does not have TC Mode, so it is not recommended to use TC heating wire. Without the Temperature Control, the TC heating wire will melt or burn out due to the higher temperature.
Therefore, we can use the temperature to control the heating wire. Of course, this way we will be able to experience a more impactful vapor. The 280W output will let us get the massive vapor quickly, if you like DL Vaping, don't miss it.
I think it's more suitable for advanced users because it not only brings a stronger vaping effect but also a bit difficult to control relative to vape beginners. Why do I say this, let me know more about the Tesla Invader 4 VV Kit?
How about Invader 4 VV Kit?
Powered by two 18650 batteries, the Invader 4 VV Mod can achieve a maximum output of up to 280W. Equipped with a knob that supports 5 level voltage regulation. The knobs are medium in size and the thumb and forefinger are well controlled.
It doesn't have a display, so you need to choose the voltage you want based on your own judgment and vaping experience. The Invader 4X RDA supports the installation of a single coil. By rotating the Tank tube, the user is free to control the amount of air intake desired. Whether it is vapor production, vapor temperature or taste. Anything can be defined by ourselves.
Teslacigs Invader 4 VV Kit details
Mod Dimension 88 * 52 * 26mm
Mod Material PC + ABS
Atomizer Dimension 25 * 34mm
Post Holes 1.5 * 3.0mm
Drip Tip Resin Wide Bore Drip Tip
Cell Type 2 * 18650 Cells (NOT Included)
Max Output Wattage 280W
Voltage Adjust 1-5 Level
Output Voltage Range 3-8V
Max Output Current 53A
Resistance Range 0.08-3.0ohm
Input Voltage Range 6.4-8.4V
USB 5V/1.5A
LED Light Indicator Blue-Green-Red
However, it should be noted that it does not have TC Mode, so it is not recommended to use TC heating wire. Without the Temperature Control, the TC heating wire will melt or burn out due to the higher temperature.
Therefore, we can use the temperature to control the heating wire. Of course, this way we will be able to experience a more impactful vapor. The 280W output will let us get the massive vapor quickly, if you like DL Vaping, don't miss it.
No comments